Hot Products
 ESD9L: Low Capacitance ESD Protection
The ESDLC Series is designed to protect voltage sensitive components
components that require ultra-low capacitance from ESD and transient voltage events. Excellent clamping capability, low capacitance, low leakage, and fast response time, make these parts ideal for ESD protection on designs where board space is at a premium. Because of its low capacitance, it is suited for use in high frequency designs such as USB 2.0 high speed and antenna line applications.
|
 IRF8707PBF: Transistor Type: MOSFET
IR's IRF8707PbF incorporates the latest HEXFET Power MOSFET Silicon Technology
into the
industry standard SO-8 package. The IRF8707PbF has been optimized for parameters that are
critical in synchronous buck operation including Rds(on) and gate charge to reduce both conduction and switching losses. The reduced total losses make this product ideal for high efficiency DC-DC converters that power the latest generation of processors for notebook and Netcom applications.
|
 AND Displays/Purdy Electronics Corporation
AND-TFT-25XS-LED: 160 x 234 Pixels LCD Color Monitor
The AND-TFT-25XS-LED is a compact full color TFT LCD module that is suitable for applications such as a camcorder,
digital camera application and other electronics products which require high quality flat panel displays. This device consists of a twisted nematic (TN) liquid crystal cell that incorporates a TFT-array that has 160 x 234 pixels on a 2.45 inch diagonal screen, X and Y drivers, an LSI controller, and a built-in LED backlight.
|
 3M MicroTouch™ ClearTek™ II Capacitive Touch Screen
ClearTek™ II touch screens, combined with the solid foundation of MicroTouch™ EX II electronics and robust MicroTouch™ software
offer high endurance solutions for a multitude of touch applications where exceptional performance, vibrant optics and environmental robustness is mission-critical, 24/7.
|
 MP0045/1E1RD0012 Push-button Switches
Bulgin’s MP0045 series of illuminated, push button switches feature colored,
18mm round actuators and have a double-pole single-throw architecture. The series of on-off switches have a maximum contact current of 3A and are only 29.5mm deep.
|
 Tyco Electronics ZDC Coax Connector Series
Tyco Electronics' ZDC RF coax connector series offers quality cost-effective solutions for commercial applications,
enabled by the use of precision die-cast components and thermoplastic dielectrics. Initially available in BNC interfaces and a variety of styles, the interfaces are compatible with MIL-C-39012 and MIL STD348A.
|
 Analog Devices AD9271 LNA/VGA/AAF/ADC and Crosspoint Switch
Analog's Devices AD9271 is designed for low cost, low power, small size, and ease of use.
It contains eight channels of variable gain amplifier with each channel featuring a variable gain range of 30dB, a fully differential signal path, an active input preamplifier termination, a maximum gain of up to 40dB, and an ADC with a conversion rate of up to 50MSPS.
|
|
 Cypress - CY3280-BK1 PSoC CapSense Controller Development Kit
Cypress Semiconductor's Universal PSoC CapSense Controller Kit includes pre-defined control circuitry and plug-in hardware,
along with controller boards for both CY8C20x34 and CY8C21x34 devices. It also offers a breadboard module and a module for implementing up to five buttons and a slider with sample overlays. The kit works with both PSoC Designer and PSoC Express.
|
 Microchip PICDEM Development Board and Diagnostic Tool
Microchip's PICDEM Touch Sense 1 Development Board and Diagnostic Tool introduce users to Microchip's Capacitive mTouch sensing solutions.
The board is uses three touch sensor configurations in the form of a directional pad, keypad and slider section. A factory programmed firmware application provides immediate access to the board's features through a Windows based diagnostic tool and PICkit serial analyzer.
|
 3312J-1-100E Trimming Potentiometer
Bourns' 3312 sealed miniature trimming potentiometers are 2mm square, single-turn and are available
from 10Ω to 1MΩ with 20% tolerance. The potentiometers are compatible with surface mount manufacturing processes. With a 50V power rating, the potentiometers operate over -55°C to 125°C.
|
 Vishay Dale IFCB-0402 Thin Film Chip Inductor
Vishay's Dale IFCB-0402 thin film chip inductor features Q values up to 49 at specified frequencies from 100MHz to 1700MHz.
In compact 0402 case sizes, the inductor is designed to provide stable inductance during high-frequency operation. The IFCB-0402 provides inductance values from 1.0nH to 22nH, with 2% and 5% tolerances options.
|
 Altera Cyclone II
Cyclone II devices can support complex digital systems on a single chip at a cost that rivals that of ASICs.
Altera's latest generation of low-cost FPGAs - Cyclone II FPGAs, offer 60% higher performance and half the power consumption of competing 90-nm FPGAs. The low cost and optimized feature set of Cyclone II FPGAs make them ideal solutions for a wide array of automotive, consumer, communications, video processing, test and measurement, and other end-market solutions.
|
 Altera Stratix
The Stratix® family of FPGAs is based on a 1.5-V, 0.13-μm, all-layer copper SRAM process, with densities of up to 79,040 logic elements (LEs) and up to 7.5 Mbits of RAM.
Stratix devices offer up to 22 digital signal processing (DSP) blocks with up to 176 (9-bit x 9-bit) embedded multipliers, optimized for DSP applications that enable efficient implementation of high-performance filters and multipliers. Stratix devices support various I/O standards and also offer a complete clock management solution with its hierarchical clock structure with up to 420-MHz performance and up to 12 phase-locked loops (PLLs).
|
|
|
 Eaton Powerware 3105 Series PWM
Eaton's Powerware 3105 series of compact, high-frequency PWM UPS provide an efficient power supply and ensure reduced power consumption
while providing the same level of performance and features as previous models. The 3105 UPS delivers reliable power quality and UPS backup power for many different applications.
|
|
